¡@WLAN ADSL2+ Router
RN243R4 (802.11n)

TN263R4 (802.11n)

TW263R4 (802.11b/g)

RW243R1 (802.11b/g)

 
¡@ADSL2+ Router
R243R1 / R1U (1-Port)

T263R1 / R1U (1-Port)

T263R4 / R4U (4-Port)

 
¡@ADSL USB Modem
G123USB

C802USB

 
¡@Qick Find Products
WLAN AP Router

WLAN USB Dongle

802.11n WLAN ADSL2+ Router

802.11b/g WLAN ADSL2+ Router

ADSL2+ Router

200Mbps Powerline Ehternet Adapter

Powerline WLAN ADSL2+ Router

ADSL USB Modem

8-Port 10/100/1000Mbps Gigabit Ethernet Switch

5-Port 10/100/1000Mbps Gigabit Ethernet Switch

IAD
(Integrated Access Device)

WLAN VoIP Gateway

VoIP ATA

VoIP Phone

PCI 56K V.92 Modem

USB 56K V.92 Modem

RS232 56K V.92 Modem

 

 

 

 

 

 


  ADSL2+ Router
  Model No.: T263R1 / T263R1U
  The ADSL2+ Router compliance to ADSL standards :
ANSI T1.413 Issue 2, ITU-T G.992.1 (G.dmt), ITU-T G.992.2 (G.lite), ITU-T G.992.3 (G.dmt.bis/ADSL2), and ITU-T G.992.5 (ADSL2plus) specification. Both Annex A (ADSL over POTS) and Annex B (ADSL over ISDN) are supported.


T263R1 (Infinity)
T263R1 (Sparkling)
 

ADSL COMPLIANCE

  • Full-rate ANSI T1.413 Issue 2
  • ITU G.992.1 (G.dmt) Annex A or B
  • Splitterless ITU G.992.2 (G.lite) specification
  • ITU G.994.1 (G.hs)
  • ITU G.992.3 (G.dmt.bis / ADSL2)
  • ITU G.992.5 (ADSL2plus)
  • Supports splitterless ADSL implementation
  • Supports Dying Gasp s

ATM SUBSYSTEM

  • PPP over ATM (RFC 2364)
  • Bridged IP over ATM (RFC 1483)
  • PPP over Ethernet (RFC 2516)
  • Multiprotocol Encapsulation over AAL5 (RFC 2684)
  • Supports up to 8 Virtual Channel Connections (VCCs)
  • Supports UBR, CBR, and VBR service classes
  • ATM Forum UNI 3.1 / 4.0 PVC
  • Support OAM F4/F5 look-back, AIS and RDI OAM cells

FEATURES

  • IP Alias
  • User Datagram Protocol (UDP)
  • Transmission Control Protocol (TCP)
  • Internet Control Message Protocol (ICMP)
  • Internet Group Management Protocol (IGMP)
  • PPP over PAP (RFC1334)
  • PPP over CHAP (RFC1994)
  • MIB II support (RFC1213)
  • Transparent bridging as specified in IEEE 802.1D
  • NAT (Network Address Translation)
  • Dynamic Host Configuration Protocol (DHCP)
  • Dynamic DNS support
  • Routing Information Protocol (RIP) v1 and v2

 

MANAGEMENT

  • TFTP client and server
  • DHCP client and server
  • FTP server and client
  • Universal Plug and Play (UPnP) support
  • Web-based Graphical User Interface (GUI) enabling end-user device configuration via HTTP
  • Update of boot image or configuration data via TFTP / FTP
  • Syslog
  • Built-in Diagnostic Tools
  • SNMP MIB support    

ETHERNET INTERFACE

  • IEEE 802.3
  • 10/100 Mbps
  • Ethernet interface supporting up to 64 LAN hosts

USB SLAVE INTERFACE (optional)

  • 1.1 slave interface
  • Compatible with 2.0 root hubs
  • Simultaneous operation with Ethernet interface
  • Driver for WIN 98 / 2000 / ME / XP / Vista
 
Home¡@| ¡@About¡@| ¡@Product¡@|¡@Event¡@| ¡@Contact us¡@| ¡@Download¡@| ¡@FAQs
 
12F, No. 181, Sec. 1, Tatung Rd. His-Chih City, Taipei Hsien, Taiwan R.O.C.
TEL: +886(2)2643-8458¡@FAX:+886(2)2643-8459¡@Copyright 2008 BaudTec Corporation