ˇ@IAD
RN243VR4-2SO

CW243VR4H-2SO

CW243VR4-2SO

C243VR1-1S

 
ˇ@WLAN VoIP Gateway
RE54VR4

 
ˇ@VoIP ATA
CVA-1S

CVA-1SO

CVA-1SP

CVA-2S

 
ˇ@VoIP Phone
CVP-1S

 
ˇ@Qick Find Products
WLAN AP Router

WLAN USB Dongle

802.11n WLAN ADSL2+ Router

802.11b/g WLAN ADSL2+ Router

ADSL2+ Router

200Mbps Powerline Ehternet Adapter

Powerline WLAN ADSL2+ Router

ADSL USB Modem

8-Port 10/100/1000Mbps Gigabit Ethernet Switch

5-Port 10/100/1000Mbps Gigabit Ethernet Switch

IAD
(Integrated Access Device)

WLAN VoIP Gateway

VoIP ATA

VoIP Phone

PCI 56K V.92 Modem

USB 56K V.92 Modem

RS232 56K V.92 Modem

 

 

 

 

 

 


  IAD (Integrated Access Device)
  Model No.: C243VR1-1S
 

The C243VR1 CPE IAD solution provides VoIP and full Ethernet bridge and router functionality and proven ADSL/ADSL2/ADSL2plus performance and combines an ˇ§always-onˇ¨ high speed connection to the telephone line, and Ethernet connection to a host PC or Ethernet hub into a single cost-effective solution. C243VR1 IAD Router with full compliance to T1.413 i2, G.992.1, G.992.2 (G.lite), G.992.3 (G.dmt.bis/ADSL2), and G.992.5 (ADSL2plus), and support for Annexes A, B and M for DSL. SIP voice protocol standard.


Voice Features

  • Support for SIP protocols
  • Telephony functions (call waiting, call hold, call forward)
  • Echo cancellation (G.168) ˇV configurable
  • Silence suppression (Voice Activity Detection (VAD) and Comfort Noise Generation (CNG))
  • FAX - T.38 relay and G.711 pass through

ADSL2+ Features

  • DMT: T1.413, G.992.1, G.992.2, G.992.3, G.992.5 with auto-detection
  • Supports PPP encapsulation over ATM (PPPoA) and PPP over Ethernet (PPPoE)
  • Supports RFC1483 Route and RFC1483 Bridge
  • Point-to-Point Protocol (PPP)
    • PPP over ATM (only single-link PPP per VC)
    • PPP over Ethernet encapsulation over the virtual
    • interface (per RFC 2516)
    • PAP or CHAP for user authentication

Network Management

  • Web-based Graphical User Interface (GUI) enabling end-user device configuration via HTTP
  • CD-rom easy setup program
 

Firewall Security

  • Stateful packet inspection (SPI)
  • NAT/NAPT
  • DMZ
  • DOS
  • Common types of Attacks
  • MAC and IP level packet filtering

LAN Protocols /Interfaces

  • Ethernet interface
  • Support 1 Port Ethernet Interface (10/100Mbps) which compliant with IEEE 802.3x standards.
  • 10/100 Mbps auto selection
  • Ethernet port supports Automatic MDI/MDI-X configuration transceiver.

Hardware interface

  • 1 Power jack
  • 1 Reset button for reset to factory default function
  • 1 Ethernet jack for LAN port connection
  • 1 RJ11 phone jack for ADSL connection
  • 1 RJ11 phone jack for VOIP FXS 1 port connection
 
Homeˇ@| ˇ@Aboutˇ@| ˇ@Productˇ@|ˇ@Eventˇ@| ˇ@Contact usˇ@| ˇ@Downloadˇ@| ˇ@FAQs
 
12F, No. 181, Sec. 1, Tatung Rd. His-Chih City, Taipei Hsien, Taiwan R.O.C.
TEL: +886(2)2643-8458ˇ@FAX:+886(2)2643-8459ˇ@Copyright 2008 BaudTec Corporation