¡@Powerline WLAN ADSL2+
¡@Router
TW263HR4-X0
TW263HR3-X1
TN263HR3-X0
 
¡@200Mbps Powerline ¡@Ethernet Adapter
I204H1
 
¡@Qick Find Products
IAD
(Integrated Access Device)
VoIP ATA
WLAN VoIP Gateway
VoIP Phone
Powerline WLAN ADSL2+ Router
200Mbps Powerline Ehternet Adapter
WLAN AP Router
WLAN USB Dongle
WLAN PCI card
16-Port 10/100Mbps Fast Ethernet Switch
8-Port 10/100Mbps Fast Ethernet Switch
802.11n WLAN ADSL2+ Router
802.11b/g WLAN ADSL2+ Router
ADSL2+ Router
ADSL USB Modem
PCI 56K V.92 Modem
USB 56K V.92 Modem
RS232 56K V.92 Modem

 

 

 

 

 

 


 

   Powerline WLAN ADSL2+ Router
  Model No.: TW263HR4-X0
 

The Powerline ADSL2+ Wireless Router compliance to supported ADSL standards : ANSI T1.413 Issue 2, ITU-T G.992.1 (G.dmt), ITU-T G.992.2 (G.lite), ITU-T G.992.3 (G.dmt.bis/ADSL2), andITU-T G.992.5 (ADSL2+) specification. Both Annex A (ADSL over POTS) and Annex B (ADSL over ISDN) are supported.

This products use existing AC electrical wiring as a physical medium for broadband networking based on the HomePlug 1.0 standard. The HomePlug 1.0 standard supports data rates up to 85 Mbps.

The TW263HR4 also combines 802.11g Wireless Access Point , it offers quick access to the wireless network.

ADSL COMPLIANCE

  • Full-rate ANSI T1.413 Issue 2
  • ITU G.992.1 (G.dmt) Annex A or B
  • Splitterless ITU G.992.2 (G.lite) specification
  • ITU G.994.1 (G.hs)
  • ITU G.992.3 (G.dmt.bis / ADSL2)
  • ITU G.992.5 (ADSL2plus)
  • Supports splitterless ADSL implementation
  • Supports Dying Gasp s

ATM SUBSYSTEM

  • PPP over ATM (RFC 2364)
  • Bridged IP over ATM (RFC 1483)
  • PPP over Ethernet (RFC 2516)
  • Multiprotocol Encapsulation over AAL5 (RFC 2684)
  • Supports up to 8 Virtual Channel Connections (VCCs)
  • Supports UBR, CBR, and VBR service classes
  • ATM Forum UNI 3.1/4.0 PVC
  • Support OAM F4/F5 look-back, AIS and RDI OAM cells

FEATURES

  • IP Alias
  • User Datagram Protocol (UDP)
  • Transmission Control Protocol (TCP)
  • Internet Control Message Protocol (ICMP)
  • Internet Group Management Protocol (IGMP)
  • PPP over PAP (RFC1334)
  • PPP over CHAP (RFC1994)
  • MIB II support (RFC1213)
  • Transparent bridging as specified in IEEE 802.1D
  • NAT (Network Address Translation)
  • Dynamic Host Configuration Protocol (DHCP)
  • Dynamic DNS support
  • Routing Information Protocol (RIP) v1 and v2

 

MANAGEMENT

  • TFTP client and server
  • DHCP client and server
  • FTP server and client
  • Universal Plug and Play (UPnP) support
  • Web-based Graphical User Interface (GUI) enabling end-user device configuration via HTTP
  • Update of boot image or configuration data via TFTP/ FTP
  • Syslog
  • Built-in Diagnostic Tools
  • SNMP MIB support    

WIRELESS 802.11g

  • Compliant 802.11g and 802.11b
  • 2.4 GHz ¡V 2.48GHz frequency range
  • Supports 64/128 bits WEP and WPA
  • 54 Mbps wireless operation rate
  • Supports Quality of Service (QoS) ¡V 802.11e

ETHERNET INTERFACE

  • IEEE 802.3
  • 10/100 Mbps
  • Ethernet interface supporting up to 64 LAN hosts

POWERLINE INTERFACE

  • 56 bits DES encryption
  • Data rate: up to 85Mbps
  • Compliant with HomePlug® 1.0 specification
  • Frequency band: 4.3 MHz ¡V 20.9 MHz

 

 
Home¡@| ¡@About¡@| ¡@Product¡@|¡@Event¡@| ¡@Contact us¡@| ¡@Download¡@| ¡@FAQs
  
12F, No. 181, Sec. 1, Tatung Rd. His-Chih City, Taipei Hsien, Taiwan R.O.C.
TEL: +886(2)2643-8458¡@FAX:+886(2)2643-8459¡@Copyright 2008 BaudTec Corporation