|
|
 |
|
|
802.11n WLAN ADSL2+ Router |
| |
Model No. : TN263R4-2T3R / TN263R4-2T2R /
¡@ ¡@ ¡@ ¡@ TN263R4-1T1R |
| |
The WLAN ADSL2+ Router combines 802.11n Wireless Access Point, ADSL2+ modem, router, four-ports switch, it offers quick access to the wired and wireless network. The device supports downstream rate up to 12 / 24 Mbps with capability of ADSL2 / ADSL2+, and upstream rate up to 1Mbps.
     
|
|
|
 |
 |
 |
TN263R4-2T3R (Infinity) |
TN263R4-2T3R (EL) |
TN263R4-2T2R (Infinity) |
TN263R4-2T2R (EL) |
TN263R4-2T2R (UFO) |
|
|
 |
TN263R4-1T1R (Infinity) |
TN263R4-1T1R (EL) |
TN263R4-1T1R (UFO) |
|
|

ADSL COMPLIANCE
- Full-rate ANSI T1.413 Issue 2
- ITU G.992.1 (G.dmt) Annex A or B
- Splitterless ITU G.992.2 (G.lite) specification
- ITU G.994.1 (G.hs)
- ITU G.992.3 (G.dmt.bis / ADSL2)
- ITU G.992.5 (ADSL2plus)
- Supports splitterless ADSL implementation
- Supports Dying Gasp s
ATM SUBSYSTEM
- PPP over ATM (RFC 2364)
- Bridged IP over ATM (RFC 1483)
- PPP over Ethernet (RFC 2516)
- Multiprotocol Encapsulation over AAL5 (RFC 2684)
- Supports up to 8 Virtual Channel Connections (VCCs)
- Supports UBR, CBR, and VBR service classes
- ATM Forum UNI 3.1/4.0 PVC
- Support OAM F4/F5 look-back, AIS and RDI OAM cells
FEATURES
- IP Alias
- User Datagram Protocol (UDP)
- Transmission Control Protocol (TCP)
- Internet Control Message Protocol (ICMP)
- Internet Group Management Protocol (IGMP)
- PPP over PAP (RFC1334)
- PPP over CHAP (RFC1994)
- MIB II support (RFC1213)
- Transparent bridging as specified in IEEE 802.1D
- NAT (Network Address Translation)
- Dynamic Host Configuration Protocol (DHCP)
- Dynamic DNS support
- Routing Information Protocol (RIP) v1 and v2
|
MANAGEMENT
- TFTP client and server
- DHCP client and server
- FTP server and client
- Universal Plug and Play (UPnP) support
- Web-based Graphical User Interface (GUI) enabling end-user device configuration via HTTP
- Update of boot image or configuration data via TFTP/ FTP
- Syslog
- Built-in Diagnostic Tools
- SNMP MIB support
WIRELESS 802.11n
- Compliant 802.11n draft
- 2T3R Modes (TN263R4-2T3R only)
- 2T2R Modes (TN263R4-2T2R only)
- 1T1R Modes (TN263R4-1T1R only)
- Supports 64/128 bits WEP and WPA
- 300 Mbps PHY rate support
- Supports 802.11i (Security)
- Reverse Data Grant (RDG) Support
- WLAN on/off Switch
- WPS Support
ETHERNET INTERFACE
- IEEE 802.3
- 10/100 Mbps
- Ethernet interface supporting up to 64 LAN hosts
|
|
|
|